Big news about SMS

[PD1FR]

Yeah I was just thinking about that. I will investigate it!

[IK1HJT]

Tested on Retevis RT-3S.
I have some problem using new browser firmware update system, so i used traditional one via CPS: seems to work fine.
For testing, i tried to upload same firmware on my TYT MD-9600 by renaming the file: no success, radio won't switch on, obviously.
So i cannot test effective working mode since i have only one compatible radio.
Thanks for great job

[PD1FR]

Copy that.

For your info- renaming the .bin never works. I think that the radio's have a different encryption. And the MD9600 is also a different source code (but stm32). If you can give me your MD9600 version number, I will build it for you:)

[IK1HJT]

Hi, obviously renaming file i knew that would be too easy to work..
My MD9600 Is about new, V5 version.
Thanks!

Davide

[I5EKX]

I updated my two UV380 radios with the latest version, the system works, but only in direct transmission, messages do not pass through the BM network, as standard I have ETSI.

Alex.

[DC7SU]

Wow! Sending works on my Baofeng DM-1701. Maybe I try to get a second ID because the AT878 has other sms config. So I get cryptic results on it.

For testing this may help (German version) http://wiki.bm262.de/doku.php?id=servicenummer

So as long I understand it’s not possible to send SMS direct to the ID in BM network; only by the SMSC service number: <callsign> message.
For this it would be incredible to have a button with [Pos 1] functionality in the editor. And maybe one with [Ins] too.

In selfcare I selected „Motorola“

[DC7SU]

the "german" SMSC service number(s) suppose to work international.
https://brara.org/BLOG/2020/05/16/dmr-b ... messaging/

although the finland comunity has their own..
https://wiki.brandmeister.network/index ... _functions

[PD1FR]

Thanks for the report!

Aa stated in the post: Tx for BM is working. Decoding sms from brandmeister is much harder.